What is the MOQ for Plastic Parts?

Yes. Acrylic is one of the few plastics that can achieve a mirror finish directly through cutting. We use single-crystal diamond tools for precision machining, followed by flame polishing or diamond grinding. Surface roughness is consistently controlled within Ra0.4μm, delivering a high-gloss appearance free of scratches or defects, resembling a mirror. No secondary coating is required. For batch production, identical parameters are used to ensure consistent mirror finish quality.

Read full answer

Appearance quality is a core strength. We use a three-stage control process: during machining, sharp tools with high RPM and shallow cuts prevent tool marks and roughness; between processes, all parts are film-wrapped and transferred in individual stations to avoid stacking scratches; before shipping, each piece is inspected under standard light sources against strict criteria for glossy, scratch-free, and blemish-free finishes. Batch consistency is guaranteed by fixed parameters and fixtures, not manual picking.

Read full answer

The criteria for judgment are consistent: high gloss, high-shine surface, no scratches, and no defects. The difference lies in the process—aluminum parts rely on anodizing and polishing, while plastic parts use diamond cutting and flame polishing or mechanical polishing. When aluminum and plastic parts are mixed in the same batch, we standardize color swatches and gloss samples to avoid visual discrepancies between the two materials on the same product.

Read full answer

Scratches on transparent plastic parts mostly occur during handling rather than machining. We isolate processes to prevent damage: protective films are applied throughout, independent trays prevent stacking between stations, and dedicated fixtures ensure proper positioning. Final inspection is performed under standard light boxes to check each unit's appearance. We guarantee a high-gloss, scratch-free, and flawless finish, not just "imperceptible" defects.

Read full answer

PP offers superior rigidity and heat resistance (mp ~160°C) with good chemical resistance and low cost, making it ideal for chemical tanks, flanges, and pump/valve parts. PE is softer, handles extreme cold better (down to -100°C), and has a low friction coefficient; UHMW-PE delivers 7x the wear resistance of carbon steel, suiting conveyor rails and wear liners. Select PP for rigidity/heat and PE for wear/low-temperature performance.

Read full answer